1 Ton Hydraulic Winch works by using oil as the working medium to transmit motion through changes in the seal volume and to transmit power through the pressure inside the oil.
1. Power section - converts the mechanical energy of the prime mover into the pressure energy (hydraulic energy) of the oil, for example: a hydraulic pump.
2. Execution section - Converts the hydraulic pressure input from the hydraulic pump to the mechanical energy that drives the working mechanism. For example: hydraulic cylinders, hydraulic motors.
3. Control section - used to control and regulate the pressure, flow and flow direction of the oil, such as pressure control valves, flow control valves and directional control valves.
4. Auxiliary part - Connect the first three parts together to form a system that functions as oil storage, filtration, measurement and sealing. For example: piping and fittings, fuel tanks, filters, accumulators, seals and control instruments.
|Wire rope layer||n||1||2||3||4||Lifting pressure||16 Mpa|
|Line pull||kgf||1100||1000||950||900||Max.pimp flow||50L/min|
|Rope speed with 80L/min||m/min||27||29||32||36||Motor displacement||160cc/r|
|A is for lifting||M18*1.5||P is for controlling||M10*1||Rope diameter||8mm|
|B is for falling||D is for lubricating||Weight||55kg|